When applying a light paint color over a dark color, the most important part of the project is the primer layer, a special paint that is applied before the common interior paint. The primer will help the paint to adhere better and last longer, and also prevents the stains and the previous color of the wall from being noticed. Find primer products at home improvement product stores in the paint section.
Check the product labels and purchase a “high coverage” primer to cover the entire base color of the wall and eliminate the need to apply multiple layers of common paint, a product that can be expensive. Taking the extra step of applying the primer on the walls allows you to save time and money.
- Remove the furniture from the room or push them into the center of the room and cover them with canvas or a plastic sheet. Take the pictures off the walls.
- Use blue painter’s tape to protect the moldings in the windows, the ceiling and those in other areas of the room that can come in contact with the brush or roller.
- Remove all nails from the walls and fill the holes with a joint compound suitable for walls to be painted with latex paint. Apply the compound with a small spatula and scrape the excess so that the product covers the hollow flush with the wall. If you are going to re-hang the pictures in the same places, it is not necessary to cover the gaps.
- Use the joint compound to fill any holes or cracks in the walls. Allow the compound to dry. Sand these particular areas, if necessary.
- Using a screwdriver, remove the covers from the sockets and switch housings before starting to apply the paint.
- Cover the floor with a canvas in the area of the walls that you are going to paint. You can move the canvas along the room as you go along painting the walls if you do not have so many tarps to cover the entire floor.
- Clean the walls you are going to paint with the help of a sponge mop and a cleaning product suitable for walls that will receive layers of paint; A product that does not generate foam and does not require rinsing. Cleaners containing trisodium phosphate are the best, but you should follow all the safety precautions detailed on the packaging.
- Pour the primer onto a paint tray and immerse the roller in the product; Slide the roller several times back and forth over the flat side of the tray to remove excess primer. If the instructions on the product packaging recommend using a wet roller, immerse it in water before beginning the process.
- Apply the primer coat with the help of a roller to cover large wall extensions. Pass the roller as close as you can from the moldings to reduce the need to cover those areas with a brush. It starts at the top of the wall and moves downwards, passing the roller over the paint that runs down over the surface. Use a ladder to reach the top of the walls.
- To finish the primer coat, apply the paint with a brush on the part where the ceiling is located and the floor with the wall, around the windows and the switches, places that you cannot cover with the roller.
- Allow the primer to dry for as long as the manufacturer’s instructions state.
- Apply the coat of paint in the same way as the primer; Start with the roller and then with the brush.
- Allow the paint to dry according to the manufacturer’s instructions and then apply a second coat.
- Replace the covers on the sockets and switch housings after the second coat of paint is dry.
- Remove the painter’s tape, pick up the canvas and reposition the furniture in the corresponding places.
Tips & Warnings
- If you apply the primer on latex paint, make sure the product is water based and then finish with latex paint.
- Tarpaulins are more expensive than plastic sheets, but they can be moved more easily and will serve you for many future projects.
- If you have to leave the project for a few hours or even overnight, cover the rollers or brushes with plastic wrappers (you can use ordinary plastic bags attached to a rubber band) to keep them moist and ready to use. This way you will not have to waste time cleaning the rollers before finishing the job.
- Have a dry cloth and a damp cloth on hand while applying the paint to wipe the product splashes before they dry.
- Keep the room ventilated while painting the walls. Opens one or more windows and uses a fan to accelerate the drying process and prevent the accumulation of dangerous gases and odors.
Painting white wooden furniture is a good way to renovate the old furniture. You can change the look of any room, but it will take time and patience. Since it is very cheap compared to buying new furniture, it is a common choice among many people. To paint white wooden furniture and achieve a professional finish, there are several steps to follow.
- Place the furniture on a protective cloth, newspaper or cardboard. Using a screwdriver, remove all accessories including knobs, handles, hinges and decorative parts. Remove all drawers and doors and place them separately on the fabric.
- Using a sandpaper or an electric sander, sand the surface of all parts of the cabinet. Make sure you do it in the direction of the wood grain to avoid scratches. Use the cloth to remove dust from the surface. Check each thing to see if you should re-sand it. It is very important to remove the previous finish completely. Once done, gently sand the surface with steel wool. This will create a smooth surface to apply the final coat of paint.
- Using a brush, apply a layer of base paint to the piece of furniture following the direction of the grain. After it dries, apply a second coat. This will ensure that the final layer adheres to the surface.
- Apply semi-worked white latex using a brush. Again, do it in the same direction as the vein. When it has dried, check that all parts of the furniture are properly painted. Usually only one coat of paint is required if base paint has been used.
- To give greater protection to the furniture, apply a layer of polyurethane to the water to all parts of the furniture. This will give you an extra shine. Allow all parts to dry before replacing accessories.
Tips & Warnings
- Painting in a ventilated area will make the furniture dry faster. Use small brushes to reach small areas. Wear eye protection, especially when using the power sander.
- Do not use a fan to dry the paint. This can ruin the finish.
If you are going to create a painting that requires leaves, it is important to know how to paint the leaves in a realistic and beautiful way. Painting leaves does not have to be a difficult task, and knowing the techniques can help you see the design and contours in a whole new way. These are the basic steps for painting realistic sheets.
Realistic sheet paint
- Study your leaves. Collect the leaves you want to paint and look at them carefully. Look at the colors, shadows and contours of the leaves. Keep in mind that there are rounded and bulbous areas, and how the leaves look darker in these areas where the ribbing appears. Then squirt the colors you see on the leaves in your palette and blend until you are satisfied with the combinations.
- Blocks the basic colors. See what the main color of the sheet is, and block that color on the canvas by painting the basic shape of a single color. Focus on creating the shape during this step, and carefully paint the outer edges so that they look exactly the same as the sheet you are painting.
- Paint the veins of the leaf. Using a lighter color, paint the veins of the leaf. You will want to include as many veins as you can because the more veins you put, the more realistic your blade will look. You will need to switch to a fine brush to paint the finer veins on the blade.
- Paint the shadow and lights on the sheet. Keep in mind that the blade seems darker where it touches the veins. Paint this area in a darker color and gradually lighten up as you move away from your veins. Continue to use this technique for all areas of veins. Once your shadow is finished, use a lighter color and very carefully highlight areas on the canvas where the sun or light touches the leaf. You will not have to use a lot of the lighter color, a little will last a lot. Once you have finished putting the relief, use a dry brush and mix the shadows and lights.
Painting light tables involves a process similar to painting other types of wooden furniture. But because light tables usually have drawers, it means that additional steps are required. If you have already painted wood, you will find this project simple. Taking your time to prepare the surface before painting, you will end up with a completely restored light table.
- Sand the surface of the table light with an electric sander with a 100 count sandpaper. Remove all paint and finished from the top and sides of the table light. Remove the drawers by sliding them and placing them on a flat surface. Sand the paint on the fronts and sides of the drawers. Finish sanding the table with a 200 count sandpaper.
- Sand the decorative edge of the light table by hand and other hard-to-reach places such as moldings or wooden handles with 100 count sandpaper. For the most difficult places use a 200 count.
- Clean all the dust from the light table with a clean cloth or towel.
- Apply the base to the table surface using a spray can filled with a wooden furniture base. Apply it evenly forwards and backwards, cover the entire piece, including the front and sides of the drawers. Allow the base to dry for 24 hours or as directed on the spray can.
- Apply a coat of paint on the base with the brush. Extend the paint in a thin layer over the entire surface and let the paint dry. Cover the table with another layer of paint and let it dry. If desired, sand the table between layers with 200 count sandpaper for a smoother finish.
Tips & Warnings
- Always paint in a room with excellent ventilation, or open windows and doors to ventilate a closed room. When painting indoors, use a cloth to protect the floor from splashing.
The only way to achieve a professional auto paint finish is to use a sprayed application system. Spray paint is highly susceptible to dust and can easily contaminate the surrounding area with unintended applications and gases. Build a car painting booth in your own garage or workshop without spending a lot of money on the materials. With the right preparation, you can build your 24 x 8 x 8 ft. (7.2 x 2.4 x 2.4 m) cabin in an afternoon. The dimensions can be easily adjusted to fit your vehicle and your workspace.
- Sweep the garage space or workshop designated for the cabin and clean all the dirt, dust and dirt.
- Attach two 1-inch (2.5 cm) diameter and 12-foot (3.6 m) PVC pipes, end-to-end through 1-inch (2.5 cm) diameter PVC tees And four outputs. Join the other two pipes in the same way. You now have two 24-foot (7.2m) long pipes. Place these pipes in parallel on the floor, at a distance of 8 feet (2.4 m).
- Join the long pipes with three 8-foot (2.4 m) PVC pipes. Use the PVC elbow 1 inch in diameter (2.5 cm) and three outlets to join the ends of 24 ft (7.2 m) pipes. Place the 8-foot pipe (2.4 m) into the four-outlet fittings. You now have a 24 x 8 foot (7.2 x 2.4 m) structure for your car paint cabin.
- Insert two 8-foot (2.4 m) PVC pipes into the three-way elbow of one end of the structure, pointing up. Using the scissor ladder, nail two screws into the ceiling directly on the structure. Tie a little twine to each screw.
- Attach the two ends of the two PVC pipes pointing upwards with a third 8-foot tubing (2.4 m) and two additional three-outlet fittings. Tie the loose twine tips around the top of the pipe to support the end of the structure. Repeat this procedure at the other end and in the middle of the cab. Connect all accessories with pipes.
- Cut large pieces of 6mm construction plastic to cover the cab seal, and secure the plastic roof to the PVC frame with adhesive tape. Cut large pieces that match the sides of the 24 x 8 ft (7.2 x 2.4 m) frame, and secure with tape. Leave a side without plastic to provide a driveway.
- Cut two pieces of plastic to fit the ends of the 8 x 8 ft (2.4 x 2.4 m) frame and tape them together. Place three large box fans on a low workbench, inside the cabinet at one end. Cut a piece of rectangular plastic to fit the line of the three fans. Locate the fans in the space cut so they can serve as an escape for the cabin and verify that there are electrical cables outside the cabin. Seal the fans against the cut edges of the plastic with tape.
- Cut three sections from the opposite end of the wall so the fans fit into the three dust filters. Tape the filters to the plastic sections removed.
Tips & Warnings
- Do not work in the cabin without the exhaust fans running. Always be careful when using the scissor ladder. Do not stop at the top of a ladder of these.
The paint spray is made to adhere to most surfaces. Some smooth surfaces or coatings are resistant paints of any kind. There are several types of spray paint for different types of materials. Paint based on oil may not work as well on some items as acrylic – based paint. Each painting is labeled with a list of materials where it works and those that can be difficult to paint. Spend some time reading to avoid misuse of paint.
- Read the instructions. Different spray paints have different instructions for use. Some require a drying time between hand and hand, while others need a second coat within a few minutes of the first. Some recommend a coat of primer, while others recommend spraying directly on the surface.
- Paint in warm weather. Most paint will have problems sticking to a surface if the temperature is too cold. It is best to save your paint project until the temperature is at least 70 degrees Fahrenheit (21 ° C) for outdoor painting.
- Clean the item you are painting. Wash the surface with warm water and let it dry before applying paint. If you paint without first cleaning, you may paint on a layer of dirt or grease. When the earth comes out, the painting will come out with it.
- Sand smooth surfaces such as glass. Lightly sanding the surface before painting will help the paint to adhere. Wash the surface after sanding to remove dust created by the process.
- Print surfaces such as wood. The wood needs to be sanded and cleaned and a coat of spray primer should be applied prior to the spray paint. Allow the primer to cure before adding the paint layers.
Tips & Warnings
- Use spray paint in a well-ventilated area, preferably outdoors.
- Place a piece of cloth under the item you are spraying so you do not paint places where you do not want to paint.
Whatever your favorite costume, you can make your look more realistic and entertaining to paint your face. Children and adults enjoy using a paint soft for the face to add details like whiskers, big noses or even fins and scales. You can make a basic painting at home to put on the face easily and it can be quickly tinted with any color of the rainbow. Do not wait for the next costume party, prepare a set of paintings to disguise and have fun on any occasion.
- Prepare a well for each color of makeup you want to make and then put a teaspoon of cornstarch in each well.
- Add 1/2 teaspoon cream to the skin over the cornstarch. Mix with a spoon until a homogenous substance is obtained.
- Pour 1/2 teaspoon of water into each well and mix with the other ingredients. Add another 1/2 teaspoon in each well until the mixture is smooth and a consistency sufficient to spread.
- Add one drop of food tincture to the first well and mix. Use only one drop at a time until the paint has the desired color. Do the same with each of the wells until the paints have color?
Tips & Warnings
- Clean your face with a baby wipe before applying the paint, to obtain a even application.
- Use a thin brush to apply the paint on your face if you need to make thin lines.
- Do not put face paint on your eyes, nose or mouth. The painting is not meant to be eaten or eaten.
Whether you look for a performing a creative task to keep kids busy or want to use makeup to complete the look of a costume, you can make a painting for the face non – toxic products that you probably already have in your kitchen. By combining some simple and inexpensive ingredients, you can create a fun face painting that children of all ages can use. Once you mix the ingredients, you can combine several colors to paint the face of each child and complete her makeup.
- Combine a cup of flour with 1 cup and 1/2 of cold water and mix both in a small saucepan until the flour is no longer lumps.
- Add 1 and 1/4 cup of hot water to the pan and bring to a boil. When the mixture boils, it will begin to thicken. Remove the pan from the heat and beat as necessary, to ensure that the mixture is completely homogeneous. Pour the mixture into a bowl.
- Place the bowl and the mixture in a refrigerator for at least an hour while it cools. Separate in two bowls the flour mixture in equal parts and then add a few drops of dye to each until the desired color is obtained.
- Apply the mixture on the face. Use different colors to create various aspects. For example, for a pirate you can use brown food coloring to create a beard. If the painting is a clown, you can use the mixture of colorless flour to cover the face and then flour with blue or red coloring to paint around the eyes or mouth.